Vision Fitness TF40 Manuel Du Propriétaire page 14

ASSEMBLY STEP 2
ALL
BOLT (A)
MODELS
20 mm
Qty: 6
T40 SHOWN
CONSOLE CABLES
RIGHT CONSOLE MAST
14
HARDWARE FOR STEP 2 :
SPRING ARC
WASHER (B) WASHER (C)
8.2 mm 8.4 mm
Qty: 6 Qty: 4
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (D)
ARC WASHERS (C)
Open HARDWARE FOR STEP 2.
A
B Guide CONSOLE CABLES from HANDLEBARS
FLAT
through and out of the tops of the CONSOLE
WASHER (D)
8.2 mm
MASTS.
Qty: 2
C Slide HANDLEBARS onto CONSOLE MASTS.
NOTE: Do not pinch console cables while
attaching the handlebars.
RIGHT HANDLEBAR
D Attach right HANDLEBAR to right CONSOLE
MAST using 1 FLAT WASHER (D), 1 SPRING
WASHER (B) and 1 BOLT (A) from the inside and
2 ARC WASHERS (C), 2 SPRING WASHERS (B)
and 2 BOLTS (A) from below.
NOTE: Do not tighten bolts until step 4 is complete.
Repeat on other side.
E