Density Determination Of Solids; Preparation; Series Kern Abs-N, Acs; Invoke Mode For Density Determination Of Solid Material - KERN YDB-03 Mode D'emploi

5 Density determination of solids

For the determination of the density of solids, the solid is first weighed in air and then
in the aid liquid, whose density is known. From the weight difference results the
buoyancy from where the software calculates the density.
As aid liquid, usually distilled water or ethanol is used, see density table chapter 8.

Preparation:

 Install density determination set, see chap. 4.3.2

5.1 Series KERN ABS-N, ACS

5.1.1 Invoke mode for density determination of solid material

 Turn on balance by pressing the ON/OFF key.
 Call up menu:
In weighing mode press the MENU button twice.
 Press the navigation buttons ( ) repeatedly until „APL.FUNC" is displayed.
 Press the PRINT key.
 Press the navigation buttons ( ) repeatedly until „SG" is displayed. To confirm,
press TARE, "SET" followed by your current setting will be displayed.
YDB-03-BA-e-1410

17