Determining Density Of The Test Liquid - KERN YDB-03 Mode D'emploi

6.1.2 Determining density of the test liquid

1. Fill test liquid into the glass beaker.
Make sure that the balance is in the mode for density determination of liquids (see
chap. 6.1.1).
If weighing balance does not show Zero, press TARE.
2. Put the sinker into the upper sample dish.
The weight of the sinker in air will be displayed.
3. Wait until stability display ( ) appears, then press UNIT. "SINK" will be shown.
52
Fig.5: Weighing in air
YDB-03-BA-e-1410