Series Kern Aet - KERN YDB-03 Mode D'emploi

5.6 Series KERN AET

Preparation:
AET 200-4NM
AET 500-4
AET 100-5M
AET 200-5DM
Selecting density application:
For instance, tap the icon
select application density
The factory configuration provides enabled special function keys
<
YDB-03-BA-e-1410
 Disconnect scale from power supply
 Remove standard weighing plate
 Installing the density determination set,
see chap. 4.3.2.
 Don't disconnect scale from power supply
 Carfully remove standard weighing plate
while the instrument is on.
 Installing the density determination set while
the instrument is on see chap. 4.3.2
 Set balance to zero.
in the top left corner of the display window and
.
s well as a special info box for percentage determination.
> a
41