Enter Density Of The Sinker - KERN YDB-03 Mode D'emploi

6.2.2 Enter density of the sinker

 In weighing mode press the CAL key repeatedly until „SettinG" is displayed.
 Press the TARE key.
 Press the CAL key repeatedly until „Sv Set" is displayed.
 Press the TARE button, the currently set sinker volume is displayed. In the upper
part of the display panel, the
indicate numerical input status. The active digit is flashing.
For changes, enter sinker volume using the navigation keys.
UNIT key:
Increase the flashing digit
PRINT key:
Digit selection to the right
TARE key:
Confirm entry
 Back to menu / weighing mode, press ON/OFF key repeatedly
YDB-03-BA-e-1410
symbol and the # symbol appear in order to

57