Series Kern Aes-C; Invoke Mode For Density Determination Of Solid Material - KERN YDB-03 Mode D'emploi

5.3 Series KERN AES-C

5.3.1 Invoke mode for density determination of solid material

 In weighing mode press the MODE key, „F1 WEIGHING" will be displayed.
 Press repeatedly until the density determination function for solid material
„F6" is displayed.
 Press , from here on the balance is in the mode for density determination of
solid material.
Enter density of the auxiliary liquid:
 Press
 Press , the currently set auxiliary liquid is displayed.
30 YDB-03-BA-e-1410