KERN YDB-03 Mode D'emploi page 129

5. Press the navigation buttons ( ) repeatedly until „SG" is displayed. To confirm,
press TARE, "SET" followed by your current setting will be displayed.
6. Press the cursor keys ( ) repeatedly until "L.DENS" ("density determination
fluid" mode) appears.
7. Confirm with TARE key. "SET" followed by the display for entering the sinker
volume will be displayed.
8. Press TARE key and the display will change to numeric data input.
# indicates that the weighing balance is in numeric input mode. The first digit is
flashing and can be changed.
Using the cursor keys, enter the drop shaft's volume (See chap. 6).
Numeric input
# indicates that the weighing balance is in numeric input mode. The first digit is
flashing and can be changed.
Increase flashing digit

Decrease flashing digit

Digit selection to the right

Confirm entry
9. The balance changes into the mode for density determination of liquids.
To change from density mode  to weighing mode press MENU for 3 s.
YDB-03-BA-e-1410 51