KERN YDB-03 Mode D'emploi page 124

3. Wait for stability display and confirm by
"sample in air" will be displayed under <weighing process 1>.
4. Place solids in the lower filter dish.
For this remove the immersion basket out from the frame. Always ensure that,
when re-immersing into the liquid, no additional bubbles adhere; it is better to use
pincers to place the sample directly on the sifting bowl. Make sure that the sample
is at least 1 cm immersed.
5. Wait for stability display and confirm by
then displays the solid matter's density.
46
Fig. 2: "Weighing in auxiliary liquid"
.
. The weight value
. The weighing scale first determines,
YDB-03-BA-e-1410