Series Kern Als-A; Determine Density Of Sinking Solid Bodies (D >1 G/Cm 3 ) - KERN YDB-03 Mode D'emploi

5.4 Series KERN ALS-A

5.4.1 Determine density of sinking solid bodies (d >1 g/cm
 Remove the immersion basket and place the glass beaker filled with the auxiliary
liquid in the centre of the platform. Filling height should be approx. ¾ of the
capacity. Make sure that it has no contact with the frame.
Remount the immersion basket. Make sure that it does not touch the glass
beaker.
 In weighing mode press MENU button. The first menu item „count" is displayed.
 Press MENU button
 Acknowledge using PRINT button, the current setting is displayed.
 Using MENU button select „d SoLid"
 Confirm by pressing the PRINT button. The currently set density of the aid liquid
is displayed (factory setting 1.0000 g /cm
 To change, enter the density of the aid liquid using arrow keys   .
 Confirm input by pressing the PRINT button.
 The display for weight determination of the "sample in air" appears.
 Confirm by pressing the PRINT button.
 Should the balance not show Zero, press the TARE button.
 Place sample of solid material in the upper sample dish, see fig. 1, chap. 5.1.2.
 Wait for stability display ( ), then press
 Wait until the display for weight determination of „sample in aid liquid" appears.
 Confirm by pressing the PRINT button.
YDB-03-BA-e-1410
3
)
3
for distilled water at 20°C).
.
35