Series Kern Abt; Invoke Mode For Density Determination Of Solid Material - KERN YDB-03 Mode D'emploi

5.2 Series KERN ABT

5.2.1 Invoke mode for density determination of solid material

 Turn on balance by pressing the ON/OFF key.
 Call up menu:
In weighing mode press the CAL key repeatedly until „FUnC.SEL" is displayed.
 Press the TARE key.
 Press the CAL button repeatedly until „Unit.SEL" will be displayed.
 Press the TARE key.
 Press CAL key repeatedly until „U-
material") is displayed.
 Make sure that the stability display ( ) appears, if not, confirm with the TARE key.
 Back to menu / weighing mode, press ON/OFF key repeatedly
YDB-03-BA-e-1410

d" (mode "density determination solid



25