Tour Set - Abus TVCC75100 Manuel Utilisateur

8. AUTO SCAN – EXIT
To exit the AUTO SCAN menu without saving the changes, select EXIT.
9. AUTO SCAN – SAVE AND EXIT
To save the memorized data and escape this page, move joystick to the right direction when
cursor is at SAVE AND EXIT.
10. AUTO SCAN – EXIT
To escape this page without saving, move joystick rightwards here.

8.6 Tour Set

8 programmable tours can be set and each tour is capable to memorize up to 60 preset steps. After
setting the data to each tour group, 71~78 + preset buttons are working as group tour # 1~8.

Maxpro protocol provides only three quick operation keys (87~89 + preset) for group tour,
but it is possible to set up to group tours #8.
TOUR SET
TOUR NO
TOUR TITLE
TOUR STEP
PRESET NO. : 01
DWELL TIME : 03
SPEED
SAVE
EXIT
1. TOUR SET – TOUR NO.
Up to 8 group tours are available to set by the joystick.
2. TOUR SET – TOUR TITLE
To set tour title, select up to 16 characters moving Joystick to the left or right.
Press ZOOM TELE button to move to the next character from the left to the right and ZOOM
WIDE button to move to the prior character from right to left.
Space is displayed when
the reference of menu controller.
3. TOUR SET – TOUR STEP
Each tour group consists of up to 60 preset steps for sequential images with different dwell
time and speed. It is possibly to match any preset # for each tour step.
: 01
: TOUR01□□□□□□□□
: 01
: 300°/S
appears. Tour title is not displayed on the monitor, it is only for
DEFAULT SETTING
74