Dome Setup; Default Setting - Abus TVCC75100 Manuel Utilisateur

To enter OSD Menu, press the MENU button or 95+Preset (Maxpro 90+Preset) and Menu is
displayed:
MAIN MENU

DOME SETUP

CAMERA SET
AUTO SCAN
TOUR
PRAVACY
PATTERN
ALARM
SECTOR
EXIT

Move the joystick up or down to move to the position and left or right to make selection or
change values.
8.2 Dome Setup
To enter Dome setup, move the joystick rightwards when cursor is on dome setup.
CAMERA ID
RECOVER
MANUAL SPEED
AUTO FLIP
ZOOM SPEED : FAST
ALARM
LANGUAGE
[NEXT PAGE]
SAVE AND EXIT
EXIT
1. DOME SET – CAMERA NAME
To set camera name, select up to 16 characters moving Joystick to the left or right.
Press ZOOM TELE button to move to the next character from the left to the right and ZOOM
WIDE button to move to the prior character from the right to left.
Space is displayed when "
2. DOME SET – RECOVER
This feature allows the dome to activate the last specified operation (auto scan, group tour,
preset, pattern or sectors) after a programmed time of inactivity or restart after power shut
down.
The procedure is as following: define any operation and then go to DOME SET and change
RECOVER to any value. Recover time can be programmed from 15 second to 99 seconds
and the default setting is OFF.
DOME SET
: CAM1□□□□□□□□□□□
: OFF
: 150°/S
: OFF
: DISABLE
: ENGLISH
appears.
"

DEFAULT SETTING

65