Enter Password - Abus TVCC75100 Manuel Utilisateur

9. DOME SET – [NEXT PAGE] – [PASSWORD]
To enter this page for setting a password, move joystick to the right. The password is
selectable between number 001 and 255. Confirm with PRESET button. The default setting
is BLANK.

ENTER PASSWORD

BY ENTERING PRESET
CODE
PASSWORD
CONFIRM
Press any number from 001~255 and preset button twice on password typing field and on confirm
field. Then "CONFIRMED" is displayed on the monitor and the menu will change to the previous
page automatically.
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM
<CONFIRMED>
If user enters different numbers between PASSWORD and CONFIRM, "CANCELLED" is displayed
on the monitor and the menu will return to the previous page automatically if user fails 3 times.

After setting a Password, the operator has to type in memorized password in order to enter OSD
MAIN MENU, or to change any stored settings, e.g. Pattern, Tour etc.

The operator must remember the password for the operation since the manufacturer does not
provide a master password.

Do not forget to leave menu with SAVE AND EXIT on first page.
***
***
***CONFIRMED
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CANCELLED
<CANCELLED>
67