Manager Menu - Melitta cup-breakfast Mode D'emploi

11. Manager menu

This menu provides access to the protected settings
("Manager functions") described in the next chapter
provided these have been activated by our Technical
Service staff.
a) Accessing the manager menu
* Open the machine door and turn the key-
operated switch clockwise to the right (black
dot in illustration).
When you close the door, the manager menu will
➀
now appear in the display.
GB
b) Selecting menu items
First choose the menu item which you would like to
check or change. Press the keys in the control panel
next to the respective symbols in the display:
# (2) to move up one line,
$ (3) to move down one line
(8) to select the desired menu item or to
Enter
accept a previously set value,
(4) to exit the menu page.
Esc
c) Changing menu settings
If values are offered as selection options, then press
# (6) to move up one line,
$ (7) to move down one line.
If values are offered as a bar graphic, then press ...
+ (2) to extend the bar value,
– (3) to reduce the bar value.
d) Confirming / rejecting changes
When you have made a selection and changed the
setting, press the key next to ...
(8) to confirm the selection and exit this
Enter
menu page,
(4) to reject the selection and exit this menu
Esc
page without making changes.
e) Ending manager menu
* Do not forget to turn the key-operated switch
fully to the left and to remove the key when you
have finished checking or changing settings!
➀
➀
Storage volume
Coffee jug filling
Info
!
On/Off
Products
" Operating parameters
Service
Esc
16
Enter
!