"Language" Sub-Menu - Melitta Caffeo CI Mode D'emploi

"Water hardness" sub-menu
Here, the water hardness can be set. Use
the test strip provided to determine the
water hardness in your area. In doing so,
please comply with the instructions on the
test strip packaging. Water hardness is set
at "Very hard" in the factory.
• Call up the Water hardness sub-menu.
• Select the water hardness range for your
area (e.g. Very hard). The appliance
then automatically returns to the main
menu.
Water
hardness range
Soft
Medium
Hard
Very hard

"Language" sub-menu

Here, the language for the display can be
set.
• Call up the Language sub-menu.
• Select the desired language (e.g.
English).
• To confi rm the question (e.g. Change
language?), select Yes in the menu. The
appliance then automatically returns to
the main menu.
"Statistics" sub-menu
Here, the total number of coffee
specialities prepared since the appliance
was fi rst started up can be called up.
• Call up the Statistics sub-menu.
• The total number of all prepared
beverages is displayed.
"System" sub-menu
Here, the appliance can be reset to the
default settings and vented.
30
BA_CI_042015.indd 30 BA_CI_042015.indd 30
°dH °f
0 - 7 .2 °dH 0 - 1 3 °f
7.2 - 1 4 °dH 13 - 2 5 °f
14 - 21.2 °dH 25 - 3 8 °f
> 21.2 °dH >38 °f
Resetting the appliance to the default
settings
• Call up the System sub-menu.
• Select Factory settings in the menu.
• Select Reset in the menu. All settings
including the personal settings in the
My Coffee menu are reset to the default
settings.
Overview of default settings:
Espresso Dispensed quantity
Coffee strength
Brewing temperature
Café Crème Dispensed quantity
Coffee strength
Brewing temperature
Cappuccino Dispensed quantity
Milk froth quantity
Coffee strength
Brewing temperature
Latte Dispensed quantity
Macchiato
Milk froth quantity
Milk quantity
Coffee strength
Brewing temperature
50 ml
Strong
normal
120 ml
normal
normal
60 ml
80 ml
Strong
high
70 ml
180 ml
0 ml
normal
high
20.04.2015 20:45:12 20.04.2015 20:45:12