Safety Instructions - Melitta Excellent Therm Mode D'emploi

Safety instructions
! When the appliance is switched
on, some parts become hot.
Do not touch – risk of burning!
! Always keep appliance out of
the reach of children.
! Always pull the plug out of
the socket before cleaning
or in case of absence for a
long time.
! Never immerse the appliance
in water.
! Do not use hot water. Only
fresh, cold water should be
used to fill in the watertank.
! Do not open the filter lid during
the coffee brewing process.
! This appliance is not dedicated
for use by persons (incl. children)
with limited physical, sensorical
or mentally ability or for
want of experience or/and
for want of knowledge unless
they are supervised by a person,
who is responsible for their
security or got instruction
how the appliance has to be
used.
! Always keep the appliance
out of the reach of children,
children shall be supervised
to secure that they will not
play with the appliance.
! The replacement of the cord
and all other repairs must be
carried out by authorized
Melitta Customer Service
Centres only or by a person
of similar qualification. This
appliance is designed to be
used in households and similar
use as e.g.:
! in kitchens for staff in shops,
offices, and other commercial
fields
! in agricultural properties
! by clients in hotels, motels
and other residence facilities
! in breakfast guesthouses.
Before preparing your first cup
of coffee . . .
clean the appliance by filling the water tank with
clear cold water and allow the water to run through
(without coffee). Turn the machine off and leave it
to cool down for 5 minutes before repeating the
process.
Coffee Preparation
1. Take therm jug and filter out of the appliance.
2. Raise lid of the water tank and pour the required
amount of fresh cold water into the tank. The
required number of cups – from 2 to 10 – is
determined by referring to the scale on the water
level indicator. (Fig. 1)
3. Fold over the seamed edges of a Melitta
1x4 and place it in the filter. Scoop the ground
coffee into the filterbag. Recommendation: one
level of coffee measure (approx. 6g) per cup or
vary according to taste. (Fig. 2)
4. Place the filter on the therm jug (without lid) and
put both back into the appliance. (Fig. 3)
5. Switch the appliance on – the on/off switch lights
up, showing that the machine is operating. (Fig. 4)
Attention: Do not take out the therm jug and
filter while brewing cycle – risk of scald due to
leaking hot steam!
6. After ending of the brewing process remove the
therm jug and the filter from the appliance. Remo-
ve the used filterbag from the filter – filterbag and
coffee are compostable – and set the filter aside.
7. Close the therm jug with the lid (Fig. 5).
8. For pouring out the coffee press the lever at jug
lid. Lid must not be removed or turned = one-
hand-operation. (Fig. 6)
9. The appliance is equipped with an automatic shut
off function which switches the machine off after
approx. 15 minutes. Appliance can be switched off
manual anytime by using the on/off switch.
Cleaning and Maintenance
Always pull the plug out of the socket before
cleaning!
• Lid of the appliance and water spout are removable
and can be cleaned in the dishwasher.
Æ Pull the lid from the watertank to remove it.
(Fig. 7)
Æ Detach the spout from the pipe to remove it.
GB
filterbag
®
5