Mounting Or Removing Of Arm Supports - Vermeiren V100 Mode D'emploi

N
To apply the brakes:
1. Push the brake handles forward till you feel a distinctive click.
L
CAUTION:
flat horizontal surface before releasing the brakes. Never release both brakes
simultaneously.
To release the brakes:
1. Release one brake by pulling the handle backwards.
2. Hold the hand-rim of the release wheel with your hand.
3. Release the second brake by pulling the handle backwards.
2.6

Mounting or removing of arm supports

The arm supports of the wheelchair can be mounted by following instructions.
L
CAUTION:
bottom side of the arm support.
Risk of unintended movement – Make sure the wheelchair is on a
Risk of clamping – Keep fingers, buckles and clothes away from the
1. Mount the rear tube of the arm rest in tube

hood .
2. Make sure the arm support clicks in the
locking mechanism.
3. Fold the arm rest forward.
4. Click the front tube of the arm rest in tube

hood .
Page 8
V100
2011-01