Operation; Start Cooking - ETNA KIV12ZIL Mode D'emploi

OPERATION

Start cooking

1. Touch the ON/OFF key for about two seconds.
A buzzer beeps once;
▷
▷ The power indicator light will flicker, indicating that the induction hob has entered the
state of standby mode.
If in standby mode there is no operation for 60 seconds the induction hob turns off.
▷
2. Place a suitable pan on the cooking zone.
▷ Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
3. Touch the power control key.
4. Setting the power by touching the "-" or "+" keys.
You can modify the power setting at any time during cooking.
▷
When the buzzer beep after you have touched the power key:
• you have not placed a pan on the correct cooking zone;
• the pan you're using is not suitable for induction cooking;
• the pan is too small or not properly centered on the cooking zone.
▷ No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minute if no suitable pan is placed on it.
▷
EN 10