ETNA KIV12ZIL Mode D'emploi page 31

TROUBLESHOOTING
Failure
The LED does not
come on when unit is plugged
in.
The Cooking Mode Indicator
comes on, but heating does
not start.
Heating stops suddenly
during operation and you hear
a beep every second.
In case of an operation failure or if the faults / error indication does not disappear,
disconnect the cooking hob from the power mains for a few minutes (undo the fuse or
turn of the main switch); then, reconnect it to the power mains and turn on the main
switch key. If the problems persist, call a service technician.
Problem
No power supplied.
High temperature of the hob.
Pan type is wrong.
Pot diameter is too small.
Solution
Check to see if plug is
secured tightly in outlet and
that outlet is working.
Ambient temperature may
be too high. Air intake or Air
Vent may be blocked.
Use the proper pots and
pans.
EN 15