Operation; Switching On And Power Setting - ETNA KI460ZT Mode D'emploi

OPERATION

Switching on and power setting

EN 12
The power can be set to 9 different levels. The hob also has a 'boost'
setting which is indicated by a 'P' on the display (see 'Boost').
C
C
B
• Place the pan in the middle of a cooking zone.
• Press the On/Off button (A).
You will hear a single beep and a '0' will appear in the display (B)
next to each cooking zone. If you don't do anything else, the
cooking zone will switch off automatically after 10 seconds.
• Press the on/off button (C) for the cooking zone concerned.
The '0' next to the selected cooking zone will light up clearly.
• Using the – and + buttons (E) select the preferred power level.
When you select the – button directly, the cooking zone will be
switched on at power level 9.
The set power is visible in the display (B).
H
B1 E A E
C
C
B