Operation; Start Cooking - ETNA KIF577ZT Mode D'emploi

OPERATION

Start cooking

Use of the touch keys
Place the tip of your finger flat on a key or the slider to achieve the best results. You do not
have to apply any pressure. The touch keys only react to the light pressure of a fingertip.
Do not operate the controls with any other objects.
Each key or the slider activation is followed by a sound signal.
1. Touch and hold the On/Off key until you hear an audio signal.
All displays show '0' and '--' (timer display), indicating that the induction hob has
▷
entered the state of standby mode.
2. Place a suitable pan on the cooking zone.
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
▷
3. Touch a slider to select a power setting.
▷ A short acoustic signal will sound.
The power level indicator is flashing.
▷
When the pan detection symbol flashes:
• you have not placed a pan on the correct cooking zone;
• the pan you're using is not suitable for induction cooking;
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
▷
The display will automatically turn Off after 2 minutes if no suitable pan is placed on it.
▷
If the hob is not used for 60 seconds, it will stop automatically.
EN 14
<--------------------->