Operation; Start Cooking - ETNA KIV160RVS Mode D'emploi

OPERATION

Start cooking

Use of the touch keys
Place the tip of your finger flat on a key to achieve the best results. You do not have to apply
any pressure. The touch keys only react to the light pressure of a fingertip. Do not operate the
controls with any other objects.
Each key activation is followed by a sound signal.
1. Touch and hold the On/Off key until you hear an audio signal.
▷ All displays show '-' or '--', indicating that the induction hob has entered the state of
standby mode.
2. Place a suitable pan on the cooking zone.
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
▷
3. Touch the "-" or "+" key to select a power setting.
A short audio signal will sound.
▷
When the pan detection symbol flashes alternately with the power setting:
• you have not placed a pan on the correct cooking zone;
• the pan you're using is not suitable for induction cooking;
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
▷
The display will automatically turn Off after one minute if no suitable pan is placed on it.
▷
If the hob is not used for 60 seconds, it will stop automatically.
EN 13