AVENTICS | EtherNet/IP™ | R412012728–BDL–001–AC
1
About This Documentation
These instructions contain important information on the safe and appropriate
assembly, operation, and maintenance of the bus coupler and how to remedy simple
malfunctions yourself.
Read this documentation completely, especially chapter 2 "Notes on Safety" on
page 44, before working with the bus coupler.
1.1 Required and supplementary documentation
Only commission the product once you have obtained the following
documentation and understood and complied with its contents.
Table 1:
Required and supplementary documentation
Title
Documentation of the valve system
HF04 D-SUB
Documentation of the valve system
HF03-LG
Documentation of the valve system
CD01/02-PI
Documentation of the B-design
stand-alone module extension
System documentation
Further information on the components can be found in the online catalog at
www.aventics.com/pneumatics-catalog.
1.2 Presentation of information
To allow you to begin working with the product quickly and safely, uniform safety
instructions, symbols, terms, and abbreviations are used in this documentation.
For better understanding, these are explained in the following sections.
1.2.1
Notes on Safety
In this documentation, there are safety instructions before the steps whenever there
is a risk of personal injury or damage to equipment. The measures described to avoid
these hazards must be observed.
Safety instructions are set out as follows:
Hazard type and source
Consequences
Precautions
Safety sign: draws attention to the risk
Signal word: identifies the degree of hazard
Hazard type and source: identifies the hazard type and source
Consequences: describes what occurs when the safety instructions are not
complied with
Precautions: states how the hazard can be avoided
About This Documentation
Document number
R412015493
R412008233
R412012449
R412008961
SIGNAL WORD
43
Document type
Instructions
Instructions
Instructions
Instructions