Operation With A Dcc Command Station (Z21 / Multi Maus); More Functions - Roco Xrotm Manuel D'utilisation

All manuals and user guides at all-guides.com
The Sounddecoder

▪ Operation with a DCC Command Station (Z21 / multi MAUS)

Programming modes:
The locomotive and carriages react to all DCC programming modes.
We recommend: direct CV programming (byte by byte) or POM mode (programming on main track).
The programming is described in the Z21 / multi MAUS manual.
Reading CVs:
With the appropriate equipment (e.g. Rocomotion 10785 / multi zentrale ), you can read the
pro
value byte by byte and bit by bit.

▪ More Functions

You can find out about a range of other possible set-tings, which are probably very rarely needed,
relating to drive speed curve, load control setting or noise synchronization from the detailed
handbook. This can be downloaded as a pdf document MX645 from www.zimo.at
34
8072800920 (Quer).indd 34 02.07.2013 13:16:56