Yamaha FX Nytro 2008 Manuel D'atelier page 542

2
a
INSTALLATION
1 1. Install:
NOTE:
• Hook the hooked portion a of the brake hose
holder onto the radiator stay, and then fasten the
holder with the bolt.
• Be sure to install the DC back buzzer so that a
line drawn through the center of the buzzer is par-
allel to the rear frame cross member as shown in
the illustration. (For reverse model)
6-4
RADIATOR
• Radiator stay 1
• DC back buzzer 2 (For reverse model)
Radiator stay bolt:
7 Nm (0.7 m · kg, 5.1 ft · lb)
COOL