Yamaha FX Nytro 2008 Manuel D'atelier page 388

SEAT AND FUEL TANK
REMOVAL
1. Extract the fuel in the fuel tank through the fuel
tank cap with a pump.
2. Remove:
• Fuel hose connector holder
• Fuel hose
CAUTION:
• Be sure to disconnect the fuel hose by hand.
Do not forcefully disconnect the hose with
tools.
• Although the fuel has been removed from the
fuel tank be careful when removing the fuel
hose, since there may be fuel remaining in it.
NOTE:
• When removing the fuel hose from the fuel pump,
remove the fuel hose connector holder first, and
next, insert a slotted head screwdriver etc. in the
slot part a of the fuel hose connector cover 1,
then slide the screwdriver in the direction of the
arrow, and remove the fuel hose.
• Before removing the hose, place a few rags in the
area under where it will be removed.
3. Remove:
• Fuel pump bracket
• Fuel pump
• Fuel pump gasket
• Fuel sender
CAUTION:
• Do not drop the fuel pump or give it a strong
shock.
• Do not touch the base section of the fuel
sender.
5-3
ENG