PFAFF silberblau SILVERLINE Mode D'emploi page 10

Girder Trolley SILVERLINE
English
Inspection and servicing instructions
Safety instructions
Remove all the strain from the girder trolley by suitable means before carrying out inspection and
servicing work
Inspection intervals
Conduct an expert inspec-
tion before commissioning
Daily
Quarterly
Every six months
Every year
1)
For example by Pfaff-silberblau After-Sales personnel
The service life of the unit is limited, worn parts must be replaced promptly.
Troubleshooting
Problem
The girder trolley can only be
raised with difficulty.
Disposal:
After they have been taken out of use, the parts of the girder trolley are to be
recycled or disposed of in compliance with the statutory regulations.
technische Änderungen vorbehalten
Servicing and inspection work
Visual inspection of rollers (for signs of cracks and deformation)
Visual inspection of the chain
Function of the unit
Adjustment range, visual inspection of the track width lateral play
The rollers are fitted with ball bearings that are lubricated for life
Check the condition of the hand chain (remove sharp edges as they constitute an
injury risk)
Check screw connections.
Grease the meshing on the rollers and drive pinion.
Check that the model plate is completely legible.
Have the annual test carried out by an expert
Cause
No grease in the bearings and meshing.
Dirt or other foreign bodies on load girder.
Girder deformed
design changes under reserve
F09.09.001
1)
Carry out servicing work.
Clean
Repair
changements techniques sous réserve
Remedy
Seite / page 10