PFAFF silberblau SILVERLINE Mode D'emploi page 9

F09.09.001
Girder Trolley SILVERLINE
English
Commissioning
Ensure that the chains are correctly positioned; they must not be twisted and must hang freely.
Always refer to the operating manual of the lifting gear you are using.
The open meshing on the drive unit should be greased.
Function test:
Carefully move the chassis to the limit position and check the position of the limit stops.
Operation
Raise and lower the load by pulling the hand chain or by pushing the load.
load direction
load direction
Do not stand under a raised load.
Media / Recommended lubricants
Recommended lubricant for greasing points:
- Meshing, drive pinion
Multi-purpose grease DIN 51825 T1 K2K
After use the lubricant must be disposed of in compliance with the statutory
regulations.
Seite / page 9
technische Änderungen vorbehalten design changes under reserve changements techniques sous réserve