Agilent Technologies 9190520 Notice De Mode D'emploi page 41

WARNING! To avoid injury, never connect the high voltage to the pump before it is
installed into the system and all the inlet flanges are properly connected or
blanked off.
The safety specifications agreement using the pump is guaranteed using the
CAUTION!
Agilent controller and cable only.
The High Voltage cable feedthrough is designed for use with cable Agilent
CAUTION!
(P/N 9290706).
Only in this case the "H.V. Cable Safety Interlock" function is available. This
function switch off the high voltage when the relevant cable is disconnected
from the pump.
2 l/s Ion Pump User Manual / 87-900-091-01 (E)
Instructions for Use
NO!
4
Installation
41/68