Brouwland Lactoferm Soyferm Mode D'emploi page 21

Making rice paste
1. Soak rice: Use the measuring cup and take a full cup of dry rice (115g). Rinse thoroughly and
leave to soak. Soak rice for 30 minutes.
2. Add water to the stainless steel chamber: Add water to the stainless steel pitcher between the
upper and lower water-level lines.
3. Load rice and assemble the machine: Drain the rice and load it into the special rice paste
screen. Attach the rice paste screen to the head unit by moving the blade in a side-to-side
motion to allow the screen to slide properly into place. Lock the rice paste screen by turning it
counter-clockwise (markings on the milk screen indicate the proper lock and unlock directions).
>> CAUTION: BE SURE THE SCREEN IS PROPERLY LOCKED IN PLACE! If the screen becomes
loose during operation, the spinning blade could damage the screen.
4. Assemble machine and make rice paste: Connect the head unit to the stainless steel chamber.
Make sure the upper plug slides into the upper plug receptacle on top of the handle. Plug the
provided power cord into the power plug receptacle found on the main body, and connect the
other end to a wall socket. Once plugged in, the soy milk maker will beep and a red light will
flash, indicating that the power is on. Choose the paste setting by pressing the "RICE PASTE"
button on the head unit, and the red light will turn solid, indicating that the cycle is starting. The
cycle will take approximately 15 minutes. When finished, the indicator light will blink green.
5. Pour and enjoy: Unplug the base unit. Lift the head unit from the stainless steel chamber. When
removing the head unit, be careful not to touch the screen. It will be hot. Make sure that all the
paste drains from the screen before moving the head unit away from the stainless steel chamber.
Place the head unit with the screen still attached into the utility cup to cool. Carefully pour paste
from the stainless steel chamber.
>> CAUTION: Rice paste will be hot. Allow paste to cool before serving.
Making soup
Follow these instructions to make deliciuous soups
1. Add ingredients: add the ingredients for your soup directly in the stainless steel chamber.
2. Add water until the water level reaches the lower line inside the boiling chamber.
3. Attach the head unit, without the screen, and press the SOUP button.
4. When the cycle is complete (approx. 15 minutes), carefully remove the head, and pour soup into
a bowl.
5. Stir in seasonings
Cleaning
Be sure to clean the machine thoroughly after every use. Proper cleaning will ensure that SoyFerm
produces great results for years to come.
1. Unplug the unit.
2. Place head unit with screen into the utility cup to cool for about 30-45 minutes (See photo on
left).
>> TIP: For faster cleanup, add cold water to the utility cup to soak the screen. If you want to eat the
grounds, let it cool on its own.)
3. After the contents have cooled, detach the screen from the head unit by turning the screen
clockwise.
4. Unload the soybean residue and wash the screen with hot, soapy water and the provided cle-
aning brush. Ensure that the screen is cleaned thoroughly, making sure all holes are open, as a
blocked screen can affect the consistency of the milk in future operations.
E
21