Publicité
iNSTAllATiON
maintenance and cleaning
14.9 Replacing the power cable
WARNING Electrocution
If the power cable is faulty, replace it with a new one.
The power cable should only be replaced by a qualified
contractor (connection type X).
14.10 Fitting the casing ring
WARNING Electrocution
f Reconnect the earth cable to the casing ring.
f
f Fit the upper casing ring. The casing ring overlaps along the
f
joint. A tab on one end clips into the recess at the other end
of the casing ring.
f Secure the casing ring with screws.
f
f Fit the pipe collar of the condensate drain and the conden-
f
sate drain bend.
14.11 Fitting the appliance cover
WARNING Electrocution
f Reconnect the earth cable to the appliance cover.
f
f Place the cover back on the appliance.
f
f Connect the cable linking the control with the appliance PCB
f
to the back of the fascia.
f Insert the control fascia.
f
f Secure the appliance cover and the control fascia using the
f
screw at the top of the control fascia.
www.stiebel-eltron.com
SHP-A 220-300 Plus |
25
Publicité
