Important Instructions - Tractel davimast Manuel D'installation, D'emploi Et D'entretien

1. Important instructions

1. Before using the product, it is essential that the
supervisor and operator review and understand
the information in the manual provided by Tractel
SAS, in order to ensure safe and effective use of the
equipment. This manual must be made available at
all times to all operators. Additional copies can be
obtained upon request from Tractel
2. Before using this safety equipment, it is essential
that users are trained in its use. Check the condition
of the product and associated equipment and
ensure there is enough fall clearance and there are
no obstacles in the path of the fall.
3. The product may only be used by trained and skilled
operators or by operators under the oversight of a
supervisor.
4. The product must not be used and must be checked
by Tractel SAS or by an authorised and qualified
technician who must authorise in writing the re-
commissioning of the product if:
• It is not in a visibly good condition;
• There are concerns about how safe it is;
• It has been used to arrest a fall; or
• It has not undergone a periodic inspection over
the past 12 months; user safety depends on
keeping the equipment effective and strong.
5. It is advisable to conduct a visual inspection before
each use. The operator must make sure that each
component is in good working order, and specifically
check the condition of the mast rotation ring and
that it is present on the mast. When it is put in place,
the safety functions must not be deteriorated in any
way.
6. Any modifications or additions to the product is
prohibited. The equipment must be transported and
stored in its original packaging.
7. If the weight of the operator plus that of their
equipment is between 100 kg and 150 kg, it is
essential to make sure that the total weight does not
exceed the safe working load of each component of
the fall arrest system.
8. This product may be used in temperatures ranging
from -35°C to +60°C.
9. Comply with locally
regulations.
10. The operator must be physically and mentally fit
when using this product. If in doubt, check with
your doctor or your occupational doctor. Pregnant
women may not use this product.
11. This product should not be used beyond its limits or
in any situation other than for its intended use. (See
chapter 4. Functions and descriptions.)
12. If the anchor device is intended to arrest a fall
involving an operator, the operator must use a fall
arrest system in accordance with the standard
.
®
applicable occupational
EN 363. The system must guarantee a fall arrest
force below 6 kN.
13. Before each use of a fall arrest system, check that
there is enough fall clearance and that there are no
obstacles in the path of the fall.
14. An EN 361 full body harness is the only body-
gripping device that can be used in a fall arrest
system. It must be anchored onto the point marked
A on the harness.
15. It is essential for operator safety that the device or
anchor point is correctly positioned and that work
is carried out so as to minimise the risk of falls and
the height.
16. For operator safety, the dealer must supply the
following if the product is resold outside the initial
destination country: an instruction manual and
maintenance instructions for periodic inspections
and repairs, all drafted in the language of the
country of use of the product.
17. It is essential for operator safety that the supervisor
first makes sure that the fall arrest system
guarantees a fall arrest force below 6 kN.
18. In addition to fall protection equipment, it is essential
for the safety of the operator and supervisor that
they use personal protective equipment such as
helmets, safety glasses, gloves and safety shoes
when handling and using this product.
19. The product may only be used with the associated
equipment described in this manual. (See chapter
8. Associated equipment.)
20. This product may only be used in the presence of at
least two operators.
21. Do not use more than two associated pieces of
equipment on the product at the same time.
22. Follow the combinations of associated equipment
permitted in this manual.
23. Danger While using several pieces of equipment
where the safety function of one may affect or
interfere with the safety function of another.
24. For the operator's safety, it is essential that the
bracket is correctly positioned and mounted to
the davimast mast and that work is done so as to
minimise the risk of falls.
25. For the operator's safety, a rescue plan must be in
place before each operation.
26. The maximum weight of the operator is 150 kg
for all brackets intended for use with PPE and for
use with a(n) (EN 360) blocfor™ 20R and 30R fall
arrester.
27. The minimum breaking strength of the supporting
structure of the blocfor™ bracket, davimast and
base plate assembly is determined by applying a
minimum force of 16 kN vertically and horizontally,
GB
9