Table Des Matières; Safety Instructions - Tractel dynasafe Mecha 3.2 Manuel D'installation, Utilisation Et Maintenance
Masquer les pouces
Voir aussi pour dynasafe Mecha 3.2:
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Contents
1.
Safety instructions ............................... 5
2.
Definitions and pictograms ................... 6
2.1.
Definitions ....................................... 6
2.2.
Pictograms ...................................... 6
3.
Mecha 3.2............................................ 7
3.1.
Presentation .................................... 7
3.2.
Operating principle .......................... 7
3.3.
Marking ........................................... 7
3.4.
Technical specifications .................. 7
3.5.
Designation,
outline dimensions ..................................... 9
4.
Mecha 3.2............................................ 9
4.1.
environment ............................................... 9
4.2.
9
4.3.
Load limiter electrical connection .. 10
4.4.
Connection diagram ...................... 10
5.
Threshold adjustment ........................ 10
5.1.
Factory preset load limiters ........... 10
5.2.
5.3.
Adjustment of a safety threshold and
an intermediate threshold ......................... 11
5.4.
Adjustment of a safety threshold and
a "Wire rope slack" threshold ................... 11
6.
7.
Prohibited use .................................... 12
8.
Declaration of conformity ................... 13
9.
Transport and storage ........................ 13
10.
Product disposal and environmental
protection .......................................... 13
11.
Regulations and standards ................ 13
characteristics
and
1.
Safety instructions
1
For your safety and to ensure safe,
efficient use of the equipment described in
this manual, make sure you have carefully
read this manual and are perfectly familiar
with the instructions given before you
install the load limiter. A copy of this
manual must be available at all times to
equipment operators. Additional copies
can be supplied upon request.
2
Do not use the load limiter if any label on
the device or any of its accessories are
not clearly legible. Do not use the load
limiter if any markings, as indicated at the
end of this manual, are not clearly legible.
Identical labels can be supplied upon
request and must be fastened to the load
limiter before you continue to use the
device.
3
Make sure that all persons who will be
using the load limiter are completely
familiar with the operating methods and
the safety requirements involved when
using this device. This manual must be
available to all users of the device. Your
load limiter must only be used under
controlled, supervised conditions.
4
The load limiter covered by this manual
must only be installed and set into service
under conditions ensuring appropriate
installer
safety
application regulations.
5
Each time, before using the load limiter,
check that the load limiter and its
accessories are in visibly good condition.
Never use a device which is not in visibly
good condition. Return the load limiter to
the manufacturer for overhaul if any
malfunctions are observed.
6
Take all necessary steps to prevent shock
or impact to your load limiter.
7
The load limiter must never be used for
any purpose other than those described in
this manual. Never use the load limiter for
a load exceeding the working load limit
indicated on the device. In its standard
version, the load limiter must never be
used in an explosive atmosphere.
in
compliance
with
5
GB
GB
DE
NL
ES
IT
PT
GR
NO
SE
FI
DK
PL
RU
Publicité
Chapitres
Table des Matières
