Güde GD 20 I Mode D'emploi Original page 13

Chauffage au fioul
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Minimum age
The appliance may only be operated by persons over 16
years of age. An exception includes youngsters operating
the appliance within their professional education to achieve
necessary skills under teacher's supervision.
Training
Using the appliance only requires appropriate instructions
by a professional or reading the Operating Instructions. No
special training necessary.
Servicing
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless
bureaucracy at our webpage www.guede.com in the
Service part. Please help us be able to assist you. To be
able to identify your appliance when claimed, we need to
know its serial No., order No. and year of production. All
these details can be found on the type label. Enter the
details below for future reference.
Serial No.
Order No.
Year of production:
Tel.:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
support@ts.guede.com
Maintenance and storing
Keep the air slot and body with no dust and dirt.
For cleaning purposes, use a soft cloth and fine soap
solution. Prevent direct appliance contact with aggressive
cleaning agents. Aggressive, volatile and caustic cleaning
agents must not be used.
The appliance needs to be protected against moisture and
dust.
If the appliance is not used for a long time, store it in a
covered state in a dry, safe place inapproachable to
children.
Caution:
Do not service the appliance when plugged, being
operated or hot. The failure to do so could lead to
serious burns and electric shock.
Regular maintenance:
Part
Frequency
To be rinsed out every 150 – 200
Fuel tank (pic. F)
running hours or as needed
To be washed with water and soap
Air filter
and let dry out every 500 running
(pic. G)
hours or as needed.
Fuel filter
To be cleaned two times during the
(pic. E)
heating season or as needed.
Ignition
To be checked every 500 running
electrodes
hours; distance 4-5 mm.
(pic. C)
To be cleaned every season or as
Fan blades
needed; fan wheel screw to be
tightened with hand.
Maintenance-free, with permanent
Engine
lubrication.
13
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gd 30 i8510185103

Table des Matières