Publicité
Compagnons de Cantar 1:6
miroir de Cantar
Installé dans un laptop (note1), par liaison Ethernet, Tarkan
contrôle Cantar-X2 et édite les metadata des fichiers.
lancement
Coté Cantar: mettez Cantar en 'Off', branchez un câble
Ethernet CAT-5 sur l'embase du boitier HDD; le câble doit
être fermement retenu dans le guide en forme de canyon.
Coté Laptop: éliminez toute autre activité TCP/IP(note2).
Connectez le câble CAT-5. Mettez Cantar en 'On'. Lancez
l'application Tarkan et attendez 10 sec (Mac OS-X) ou 60
sec (Win-XP) que Tarkan assigne une adresse IP à Cantar,
puis cliquez l'icon 'start' pour activer l'écran principal (sous
v2.21 Tarkan fera cela tout seul).
écran principal
1a
2
1b
• Cet écran est unique en cela qu'il montre d'un seul coup
d'oeil le parcours des signaux allant des micros aux écou-
teurs, tout en incluant la position des faders et des pan-pots
du mixer. Les modulomètres et l'état des entrées analogi-
ques y apparaissent aussi.
In-Grids
The analog inputs (1a) go down, the digital and mixer inputs
(1b/c) go up to the track cross points (2). To set the inputs
of the T1–T6 tracks, go to ROUTING In-Grids (8), click on
the desired cross point, it becomes blue; double click to
desactivate.
To set the inputs of the T7T8 tracks, first click the desired
T7 cross point, it turns yellow as well as the other possible
choice(s), click the other one: they both become blue.
If you want to switch T7T8 'Off', double click the cross point
routed to T7 .
Armed tracks (5) are deep blue circled.
pour Cantar-X2
5
1c
www.aaton.com
+33 4 7642 9550
1a
6
1b
7
Out-Maps
The tracks go to the 'Left-Center-Right' track monitoring
switches (6). Analog and digital inputs go directly to the
"input monitoring" switches (7). Both (6) and (7) go to the
monitoring crown (9).
Mixer
The mixer's sliders (3) and pan-pots (4) generate the
mixdown input (1c); In PPR, TEST and ROUTING (In-Grids),
twenty six pan-pot configurations can be stored in Tarkan.
• During the creation of a pan-pot config, either on Cantar
the usual way, or on Tarkan with successive clicks on the
colored beans (100% left/right with [ctrl][click]), the bac-
kground of the pan-pot 'crown' (10) becomes red. Once
done, a [ctrl] [click] in the middle of the crown stores the
config in Tarkan's memory and pushes it into Cantar where
it becomes the active mixer pan-pot, as indicated by the
crown background which turns grey.
• Labeled from a to z, all the pan-pot configurations are
stored in Tarkan memory where they are displayed against
a green background. Browse them by cliking the left or
right half-moon. A [ctrl] [click] in the middle of the crown
pushes the selected config into Cantar: becoming 'active' it
turns from green to grey.
Manuel Cantar-X v2.25 2009 janvier 06
p.50
11
1c
9
4
10
8
1c
p.50
Publicité
