Publicité
20 Progress
Problem and alarm code
Malfunction of the water level detection
sensor.
•
The indicator
termittently.
•
The light related to the start button
flashes continuously.
Malfunction of the wash pump or the
drain pump.
•
The indicator
termittently.
•
The light related to the start button
flashes continuously.
The temperature of the water inside
the appliance is too high or malfunction
of the temperature sensor occurred.
•
The indicator
termittently.
•
The light related to the start button
flashes continuously.
Technical malfunction of the appliance.
•
The indicator
intermittently.
•
The light related to the start button
flashes continuously.
The level of water inside the appliance
is too high.
•
The indicator
intermittently.
•
The light related to the start button
flashes continuously.
The appliance stops and starts more
times during operation.
The programme lasts too long.
Small leak from the appliance door.
flashes 4 times in‐
flashes 5 times in‐
flashes 6 times in‐
flashes 12 times
flashes 15 times
Possible cause and solution
•
Make sure that the filters are clean.
•
Switch the appliance off and on.
•
Switch the appliance off and on.
•
Make sure that the temperature of the inlet wa‐
ter does not exceed 60°C.
•
Switch the appliance off and on.
•
Switch the appliance off and on.
•
Switch the appliance off and on.
•
Make sure that the filters are clean.
•
Make sure that the outlet hose is installed at the
right height above the floor. Refer to the installa‐
tion instructions.
•
It is normal. It provides optimal cleaning results
and energy savings.
•
If the delayed start option is set, cancel the de‐
lay setting or wait for the end of the countdown.
•
The appliance is not levelled. Loosen or tighten
the adjustable feet (if applicable).
•
The appliance door is not centred on the tub.
Adjust the rear foot (if applicable).
Publicité
