Publicité
How to fill the rinse aid
dispenser
CAUTION! Only use rinse aid
designed specifically for
dishwashers.
DAILY USE
1. Open the water tap.
2. Turn the knob until the programme
marker is aligned with the programme
you want to set. Set the correct
programme for the type of load and the
degree of soil.
• If the salt indicators is on, fill the
salt container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
Using the detergent
A
B
30
20
A
B
A
-
+
C
D
C
1. Press the release button (D) to open
the lid (C).
2. Fill the dispenser (A) until the rinse aid
reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of the
released quantity (B) between
position 1 (lowest quantity) and
position 4 or 6 (highest
quantity).
CAUTION! Only use detergent
specifically designed for
dishwashers.
1. Press the release button (B) to open
the lid (C).
2. Put the detergent, in powder or tablets,
in the compartment (A).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the
release button locks into position.
Setting and starting a
programme
Starting a programme
1. Open the water tap.
2. Close the appliance door.
3. Turn the knob until the programme
marker is aligned with the programme
you want to set.
• The on/off indicator is on.
• The start indicator starts to flash.
4. Press
.
Progress 13
Publicité
