TOOLCRAFT 1550315 Notice D'emploi page 24

• The cable hoist is not suitable for moving hot and/or melted objects. It must not be used in very low
temperatures or hostile environments.
• If the hoist cannot lift an object, do not attempt to touch the switch again. This indicates that the load is
heavier than the maximum load capacity.
• Do not overload the cable hoist. Never use multiple hoists to lift one object.
• Take appropriate measures to prevent an electric shock, e.g. avoid contact with grounded metal
surfaces or moisture.
• Wear suitable protective clothing, ear/hair protection and non-slip shoes when using the hoist.
• Do not wear jewellery that may get caught in the moving parts of the hoist.
• Heavy objects must only be lifted vertically. Do not use the hoist to pull objects along the floor.
• Protect the product from frost and cold.
• Only use the product in a temperature climate.
• Do not use the product in the rain or during storms. This product is designed for use in indoor rooms and
must not be used in adverse outdoor conditions.
• Before starting work, check that the rope is in the correct position on the roller.
• Never unroll the entire rope from the roller. Ensure that the rope is wound at least 3 times to avoid
damaging the rope connection.
• Never exceed the maximum load capacity stated on the rope (the value stated on the hook is not
relevant).
• Do not hang heavy objects at long lengths, as this may overload the components and cause an injury.
• If the steel rope wears out, replace it with an equivalent rope from a specialist repair centre. (See
diagram in "Maintenance").
24