Superwinch GP1800 Mode D'emploi page 7

identical replacement part (see
N O T E S
Replacement Parts list). Pass attach-
ing end of wire rope through the
fairlead (if equipped) and attach it
to the drum. When inserting the
wire rope into the drum, insert it
into the correct end of the hole pro-
vided (Figure 13). Tighten the set
screw securely.
Figure 13
M A I N T E N A N C E
A N D R E P A I R
Periodically check tightness of
mounting bolts and electrical con-
nections. Remove any dirt or corro-
sion that may have accumulated on
the electrical connections.
Repairs should be done by
Authorized Superwinch Repair
Centers ONLY. Do not attempt
to disassemble. Disassembly
will void warranty.
LUBRICATION
The gearbox is permanently lubri-
cated. Relubrication is necessary
after repair or disassembly. Use
Shell Alvenia EP2 or equivalent.
12 13