Publicité
ENGLISH (
Original Instructions)
Lower guard
The lower guard should always rotate and close freely from
a fully open to fully closed position. Always check for correct
operation before cutting by fully opening the guard and
letting it close. If the guard closes slowly or not completely
it will need cleaning or servicing. Do not use the saw until it
functions correctly. To clean the guard, use dry air or a soft
brush to remove all accumulated sawdust or debris from the
path of the guard and from around the guard spring. Should
this not correct the problem, it will need to be serviced by an
authorized service center.
Blades
A dull blade will cause inefficient cutting, overload on
the saw motor, excessive splintering and increase the
possibility of kickback. Change blades when it is no longer
easy to push the saw through the cut, when the motor is
straining, or when excessive heat is built up in the blade.
It is a good practice to keep extra blades on hand so that
sharp blades are available for immediate use. Dull blades
can be sharpened in most areas.
Hardened gum on the blade can be removed with kerosene,
turpentine, or oven cleaner. Anti-stick coated blades
can be used in applications where excessive buildup is
encountered, such as pressure treated and green lumber.
ACCESSORIES
WARNING: Since accessories, other than those
offered by STANLEY, have not been tested with
this product, use of such accessories with this
tool could be hazardous. To reduce the risk of
injury, only STANLEY, recommended accessories
should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Make this product
available for separate collection.
STANLEY provides a facility for the collection
and recycling of STANLEY products once they
have reached the end of their working life. To
take advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local STANLEY office at
the address indicated in this manual. Alternatively, a list
of authorised STANLEY repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
NOTES
STANLEY's policy is one of continuous improvement to
our products and as such, we reserve the right to change
product specifications without prior notice. Standard
equipment and accessories may vary by country. Product
specifications may differ by country. Complete product
14
range may not be available in all countries. Contact your
local STANLEY dealers for range availability
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and
if you need technical advice, repair, or genuine factory
replacement parts, contact the STANLEY location nearest
you.
TECHNICAL DATA
CIRCULAR SAW
Voltage
Frequency
Power input
Rated no-load speed
Maximum blade diameter
Maximum depth of cut at
90
o
45
o
Blade bore
Bevel angle adjustment
Weight
TWO YEAR WARRANTY
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date
of purchase, STANLEY guarantees to replace all defective
parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
•
The product has not been misused and has been used
in accordance with the instruction manual;
•
The product has been subject to fair wear and tear;
•
Repairs have not been attempted by unauthorized
persons;
•
Proof of purchase is produced;
•
The STANLEY product is returned complete with all
original components;
•
The product hasn't been used for hire purposes.
If you wish to make a claim, contact your seller or check
the location of your nearest authorised STANLEY repair
agent in the STANLEY catalogue or contact your local
STANLEY office at the address indicated in this manual. A
list of authorised STANLEY repair agents and full details
of our after sales service is available on the internet at:
www.2helpU.com
SC16
V
220~240
AC
Hz
50-60
W
1600
min
5500
-1
mm
190
mm
65
mm
50
mm
20 / 30
mm
45
o
kg
3.90
Publicité
