L'exemple suivant illustre la sortie générée par la commande, avec la commande et
les niveaux de microprogramme résultants en gras :
telnet 10.8.1xx.x2
Trying 10.8.1xx.x2...
Connected to 10.8.1xx.x2.
Escape character is '^]'.
connect to (? for list) ? [menu] admin
password for admin access ? *********
5310 > raidctl get type=lsi target=profile ctlr=0
SUMMARY---------------------------------
Number of controllers: 2
Number of volume groups: 4
Total number of volumes (includes an access volume): 5 of 1024 used
Number of standard volumes: 4
Number of access volumes: 1
Number of drives: 28
Supported drive types: Fibre (28)
Total hot spare drives: 2
Standby: 2
In use: 0
Access volume: LUN 31
Default host type: Sun_SE5xxx (Host type index 0)
Current configuration
Firmware version: PkgInfo 06.12.09.10
NVSRAM version: N2882-612843-503
Pending configuration
Chapitre 11 Maintenance du système
201