The front brake is controlled by the left brake lever (or by the right brake lever in certain countries such as India, China, United Kingdom, etc.). The rear brake is controlled

using the right-hand lever (or left in the countries listed above). Before using the bicycle, check which levers operate the front and rear brake. The brake lever must not come

into contact with the handlebar. If it does, adjustment is required.

SUSPENSION :

The fork is equipped with suspensions to limit the feeling of shocks due to the terrain. The fork is not adjustable.

OPERATION OF CLIPLESS PEDALS (NOT SUPPLIED WITH THIS BIKE):

Clipless pedals and toe-clips can be tricky to use and may take some time to get used to in order to avoid falls: engage and disengage your shoes in the pedals before setting

off. The interface between cleat and pedal can be affected by a number of factors including dust, mud, lubrication, spring tension and general wear. To adjust shoe bindings,

refer to the component manufacturer's recommendations and call on the help of a qualified mechanic.

CHANGING GEARS:

For optimal use of the gears, it's best to change them outside sequences of significant pedalling effort.

ELECTRIC OPERATION

CONTROLS

General controls

The LD940E is sold with a display which has a TFT colour screen and a remote. This screen will tell you information relating to your session (speed, distance, time, etc.)

and your electric bike (battery level, remaining battery life, level of electric assistance, etc.).

Long press : Turn the electric bike on and off.

Short press : Menu / go back to main screen

Long press : Turn the lights on and off

Short press : Increase assistance mode

Up/down : Increase/decrease values

Left/right : Switch screens

Short press : Validate

Short press : Decrease assistance mode