Decathlon LD940E Notice D'utilisation page 6

MUDGUARD ASSEMBLY:
1
3
1. Position the mudguard between the fork.
2. Place all the items as shown in picture 2.
3. Gradually tighten the screws until you reach the indicated tightening torque.
FITTING THE FRONT WHEEL :
6
B
4. Remove the shim located in the brake pads.
5. Place the wheel into the fork and the brake disc aligned and straight between the brake pads.
6. Insert the axle through the fork and the wheel and screw the stopper at the other end at the indicated tightening torque.
5 N.m
4
A
2
5
+
10N.m
5
6
90°