Publicité
When the vehicle tank is full:
7. Switch off vehicle pump.
8. Close delivery line ball valve c.
9. Separate quick-coupling.
10. Push protective caps (red) onto coupling plug
and coupling sleeve.
11. Close lid and lock.
5.2
DT-Mobil Easy
5.2.1
Storage
Do not expose the DT-Mobil Easy to direct sunlight
for extended periods either during transport or
when in storage. Excessive heating can degrade
the quality of the high-grade plastic container.
If heating produces overpressure in the sealed
container, this overpressure will be released via the
safety valve e.
i
Important!
Do not stack any filled tanks on top of
each other!
Suitable storage conditions:
•
ambient temperatures from - 10°C to + 40°C
•
level surface
•
canopy for storage outdoors
•
stackability: max. two empty tanks
5.2.2
Loading the filling station
Risk of injury!
The lid must be closed and completely
locked with the two locks m.
i
Important!
Close ball valve of the delivery line c.
5.2.2.1 Loading by hand
An empty DT-Mobil
Easy can be loaded by
hand using the grip hol-
lows on the side of the
tank. In this case, note
the weight of the filling
station when empty:
80 kg
5.2.2.2 Loading with a forklift
i
5.2.2.3 Loading with a crane
i
(folded down)
Fold up the 4 crane lugs i fixed to the side of
•
the tank.
•
Attach four suitable load handling devices of
equal length to the crane lugs.
•
The DT-Mobil Easy can be loaded onto or
unloaded from the transport vehicle.
Grip hollow
9
Important!
Use the moul-
ded recesses
on the under-
side for safe
lifting with a
forklift.
Danger!
A DT-Mobil Easy can cause severe inju-
ries if it falls.
Do not stand under suspended loads
during crane operations.
Before each crane operation, the screw
fastenings of the 4 crane lugs must be
checked for a correct and secure con-
nection.
Important!
The lid must be closed and completely
locked with the two locks m.
9
9
Crane loops
13
GB
Forklift
Crane loops
(folded up)
Lid lock
47
Publicité
