Publicité
5. Operation
5.1
DT-Mobil PRO ST and PE
5.1.1
Storage
Do not expose the DT-Mobil PRO to direct sunlight
for extended periods either during transport or
when in storage. Excessive heating can degrade
the quality of the high-grade plastic container.
If heating produces overpressure in the sealed
container, this overpressure will be released via
the safety valve.
Suitable storage conditions:
•
ambient temperatures from - 10°C to + 40°C
•
level surface
•
canopy for storage outdoors
5.1.2
Loading the filling station
Risk of injury!
The lid must be closed.
i
Important!
Close ball valve of the delivery line c.
i
Note:
When moving or loading the filling station
with a lifting truck or forklift, the length of
the fork must be at least 1.35 m. If the
fork is shorter, a fork extension must be
used. Otherwise the fork may damage
the underside of the filling station.
5.1.2.1 Moving with lifting truck
The DT-Mobile PRO can be moved with the lifting
truck on a firm, level surface. The lifting point is
between the forklift slots on the underside.
5.1.2.2 Loading with a forklift
i
Important!
Use the provided forklift slots on the
underside as lifting points for safe lifting
with the forklift.
5.1.2.3 Loading with a crane
Danger!
A DT-Mobil PRO can cause severe injuries
if it falls.
Do not stand under suspended loads duri-
ng crane operations.
i
Important!
Do not damage the lid with the crane
slings!
•
the crane lugs provided at the top of the tank
are to be used for crane operations.
•
attach 4 suitable load
handling devices of
equal length to the
crane lugs (minimum
length 2 m).
•
The DT-Mobil
PRO can be
loaded onto or
unloaded from
the transport
vehicle.
GB
45
Publicité
