Part Button hold pushed
(independent from Part
select)
Recall Button
(multiple functions)
PAGE/BANK-Button:
CATEGORIES-Buttons:
Number-Buttons 1-16
Number-Buttons 1-16
Number-Buttons 9-16
VALUE/TEMPO-wheel
VALUE/TEMPO-wheel
VALUE/TEMPO-wheel
KEYBOARD Keys
PAGE/BANK
PAGE/BANK
Always
As long as the Part Button stays pushed in a
section, it can be edited with the control of the
Synthesizer section.
In write menu
When using this button in the write menu you can
hear the tone which will be overwritten when you
save a sound. Otherwise its function is to "undo"
when you have switched a sound by mistake: The
sound can be reversed.
In Sound Select
In the Sound Select Mode you can switch between
Mode
the different sound banks with these buttons.
Always
This button chooses the sound categories. If you
are on the category that you want, push once more
and the sound bank will change.
In Drum grid
With these buttons you can put your notes into the
grid.
In Arpeggiator Edit
In Arpeggio motion Edit (start menu page 12) you
can turn the chosen notes on or off with buttons 1
to 8 (1=lowest and 8 highest). With buttons 9 to
12 you can adjust the step velocity. With buttons
13 to 16 you can adjust the step length.
Step-Edit of the
T
he buttons 9 to 12 adjust the velocity for the
Synthesizer sections
following note inputs. The buttons 13 to 16 chose
the Gate time (step length) for the following note
inputs. The value is fixed and independent from
the current resolution of the step grid.
Arpeggiator Edit
With the VALUE/STEP-wheel you can shift the
time when a step is played referring to the
"straight" beat. For example at a 8th grid and
50% the step will be played a 16th note later.
Step-Record of the
The VALUE/TEMPO-wheel chooses the tone
Synthesizer sections
height.
In the Menus
This wheel is used to change the values of the
parameters.
WRITE-Menu
You enter in the names of the sounds or the songs
with the keys. They can also be entered with the
VALUE/TEMPO-wheel.
Drum grid and Step
Choosing of the different bars in drum grid, when
Recording
it is longer than a bar.
In the Menus
Change the Menu page.