Publicité
Key Combinations
Key combinations:
As it is not possible to provide a key or dial for every single function of the Sirius, some functions are performed by
using combinations of dials and keys.
The following table will give you an overview of these functions or 'shortcuts':
Key- or dial combination
SHIFT & MOD-WHEEL
ASSIGN
SHIFT & NUMBER-key 9-12
SHIFT & PART-key
ARPEGGIO ON/OFF &
NUMBER-key 1-16
SHIFT & PAGE/BANK
ANALYSE & PART-keys
CARRIER & PART-keys
VOCODER ON/OFF &
NUMBER-key 1-16
KEYBOARD-keys &
PAGE/BANK
VOCODER ON/OFF &
MIXER-dial
Special Functions and short selection:
Many push buttons on the Sirius have other features next to their own task. They are used for example, for faster
selection or to switch to defined functions. The following table gives you an overview:
Button Special Function Edit level
Edit level
Can not be executed during
Record or Compare
Only in the Drumgrid
Not in the Drumgrid, during
Mod.Wheel-Assign or
Compare
Always
Always except the Drumgrid
Only with switched-on
VOCODER
Only with switched-on
VOCODER
Always
In the Step-edit of the
Synthesizer section
Always
136
Function
Function
Holds down the ASSIGN-key for
you. This gives you two hands to
select Parameters.
SHIFT + Number-key 9-12
selects the Velocity for the notes
which are about to be played.
Random Motif-selection for the
selected Part.
Selecting the
Arpeggiatormotions.
This key combination allows you
to transpose the keyboard in all
areas. This allows you to put out
high notes via MIDI.
In the DRUMGRID you switch
the Grid-resolution using these
keys.
You can select one or several
Parts as Analyse-signal.
You can select one or several
Parts as Carrier-signal.
Loading the 16 factory
programmes of the VOCODER.
This key combination allows you
to adjust the length of the
currently played note.
This allows you to select the
frequencies of the
VOCODERBands.
Special Functions
Publicité
