Publicité
Vocoder
The Vocoder Menu:
Most Parameters of the Vocoder-menu can also be set using the dials and keys on the front panel of
the Sirius. There are however some parameters which can only be set in the Edit-Vocoder menu. The
menu-pages of these restricted parameters are marked with a (*) in the following description of the
Edit-Vocoder menu procedure.
This is how to get to the Edit-Vocoder menu: Press the EDIT-key and select page 4 of the Edit-menu
with the right-hand PAGE/BANK-key. The following selection appears in the display:
Press the F1-key under the display to open the Edit-Vocoder-menu.
Menu-page 1: Vocoder Type
Here you can select the 16 different Vocoder types or programmes.
The types contain different bandwidth intereaction and different filter types for the Bands.
Important: When you change between types the Band volume is also changed and you will revert
to the basic factory settings as described on page 83.
Menu-page 2: Level
On page 2 you determine the output volume of the selected vocoder programme.
Menu-page 3: Panorama
Here you can set the Panorama (the position of the Vocoder-sound in the stereo image).
Select Edit <4>
[Vocoder][Song]
Edit Vocoder
|1> Typ:RobotVoc
Edit Vocoder
<2> Level: 96
100
E
d
i
t
V
o
c
o
d
e
r
<
3
>
P
a
n
:
L
<
6
1
This is really
a balance
function: As
the single
Vocoder-
Bands can
have
different pan
settings, then
each Band
can take up
its own place
in the stereo
image.
Menu-page
4*: Bypass
for the
internal
Analyse-
signal
Publicité
