Publicité
When you now press the PLAY-key of the Sirius you will notice that it will still start. Do not worry.
This is to avoid the device being stopped by accidentally pressing the SYNC.EXTERN-key. But as
long as the display shows "EXT" the Sirius is waiting for the start-command from Cubase's MIDI-
clock. To get Cubase to send its MIDI-clock, select the option "synchronise" from the Options-menu.
The following diagram shows you which settings you have to confirm in this menu.
Confirm the changes in this window with OK. When you now start Cubase the Sirius will also start.
When you stop Cubase, the Sirius also stops. Because the Sirius understands the so-called
'Songpositon-pointer' you do not always have to start Cubase at the beginning of the song. The tempo
is now set in the transport window of Cubase because Cubase is the Master.
This set-up is totally geared to synchronising a sequence of a song or a pattern in the Sirius to a Song
created in Cubase.
The Sirius as Master:
Let´s now do it the other way round: Now we want the Sirius to be the Master and to start Cubase. You
will have to switch the synchronisation of the Sirius back to internal (INT). To achieve this either press
the SYNC.EXTERN-key twice or start and stop the internal sequencer of the Sirius with the
START- and STOP-keys. Also make sure that the Parameter TxClock on page 11 of the System-menu
See page 96
is set to "ON" (factory setting).
The rest has to be set in Cubase. As in the previous example, open the window "synchronisation" in the Options-menu.
The required settings can be seen in the diagram below:
124
Publicité
