Publicité
After entering the parameters click OK to close the window. To activate the settings you only have to press the sync-
button in the transport window.
When you now press the PLAY-key on the Sirius, Cubase is automatically started as well. Try and turn the TEMPO-dial
of the Sirius or tap in a new tempo into the Sirius. You can now watch how the tempo indicator of Cubase is changing in
sync with the display informaton of the Sirius. As soon as you hit the STOP-key of the Sirius, Cubase will also stop.
The Sirius and Cubase
Recording Sirius-Pattern and -Songs into an external sequencer:
To record patterns of the Sirius with Cubase it is first of all important that you synchronise both
devices to each other. This is best done by selecting the Sirius as Master like we did in our previous
example. Cubase is the Slave again. If the synchronisation works as in our previous example you will
only have to make one setting for the Sirius. Open page 4 of the System-edit-menu and set the
Parameter "Local" to "OFF". The menu-page should now look as follows:
In this mode, note and MIDI-controller information which the sequencer of the Sirius creates is not
being sent directly to the internal synthesizer of the Sirius. The Data is now being sent directly to the
MIDI-OUT-socket of the Sirius and into your computer and is being 'housed' within the computer. The
data can then return to the Sirius through the MIDI-OUT socket of the Computer. So make sure that the
MIDI-OUT-socket of the Computer is connected to the MIDI-IN-socket of the Sirius - otherwise you
will not be able to hear anything.
Edit System/Midi
<4> Local: OFF
125
The Sirius and Cubase
Publicité
